Add gzip and h5bp configuration to the nginx config

This commit is contained in:
Kevin MacMartin 2016-05-30 20:18:10 -04:00
parent 0dcd3c8684
commit a7e88f3853
16 changed files with 232 additions and 2 deletions

7
nginx/h5bp/README.md Normal file
View file

@ -0,0 +1,7 @@
Component-config files
----------------------
Each of these files is intended to be included in a server block. Not all of
the files here are used - they are available to be included as required. The
`basic.conf` file includes the rules which are recommended to always be
defined.

6
nginx/h5bp/basic.conf Normal file
View file

@ -0,0 +1,6 @@
# Basic h5bp rules
include h5bp/directive-only/x-ua-compatible.conf;
include h5bp/location/expires.conf;
include h5bp/location/cross-domain-fonts.conf;
include h5bp/location/protect-system-files.conf;

View file

@ -0,0 +1,19 @@
# This tells Nginx to cache open file handles, "not found" errors, metadata about files and their permissions, etc.
#
# The upside of this is that Nginx can immediately begin sending data when a popular file is requested,
# and will also know to immediately send a 404 if a file is missing on disk, and so on.
#
# However, it also means that the server won't react immediately to changes on disk, which may be undesirable.
#
# In the below configuration, inactive files are released from the cache after 20 seconds, whereas
# active (recently requested) files are re-validated every 30 seconds.
#
# Descriptors will not be cached unless they are used at least 2 times within 20 seconds (the inactive time).
#
# A maximum of the 1000 most recently used file descriptors can be cached at any time.
#
# Production servers with stable file collections will definitely want to enable the cache.
open_file_cache max=1000 inactive=20s;
open_file_cache_valid 30s;
open_file_cache_min_uses 2;
open_file_cache_errors on;

View file

@ -0,0 +1,14 @@
# Cross domain AJAX requests
# http://www.w3.org/TR/cors/#access-control-allow-origin-response-header
# **Security Warning**
# Do not use this without understanding the consequences.
# This will permit access from any other website.
#
add_header "Access-Control-Allow-Origin" "*";
# Instead of using this file, consider using a specific rule such as:
#
# Allow access based on [sub]domain:
# add_header "Access-Control-Allow-Origin" "subdomain.example.com";

View file

@ -0,0 +1,17 @@
# The X-Frame-Options header indicates whether a browser should be allowed
# to render a page within a frame or iframe.
add_header X-Frame-Options SAMEORIGIN;
# MIME type sniffing security protection
# There are very few edge cases where you wouldn't want this enabled.
add_header X-Content-Type-Options nosniff;
# The X-XSS-Protection header is used by Internet Explorer version 8+
# The header instructs IE to enable its inbuilt anti-cross-site scripting filter.
add_header X-XSS-Protection "1; mode=block";
# with Content Security Policy (CSP) enabled (and a browser that supports it (http://caniuse.com/#feat=contentsecuritypolicy),
# you can tell the browser that it can only download content from the domains you explicitly allow
# CSP can be quite difficult to configure, and cause real issues if you get it wrong
# There is website that helps you generate a policy here http://cspisawesome.com/
# add_header Content-Security-Policy "default-src 'self'; style-src 'self' 'unsafe-inline'; script-src 'self' https://www.google-analytics.com;";

View file

@ -0,0 +1,11 @@
# Prevent mobile network providers from modifying your site
#
# (!) If you are using `ngx_pagespeed`, please note that setting
# the `Cache-Control: no-transform` response header will prevent
# `PageSpeed` from rewriting `HTML` files, and, if
# `pagespeed DisableRewriteOnNoTransform off` is not used, also
# from rewriting other resources.
#
# https://developers.google.com/speed/pagespeed/module/configuration#notransform
add_header "Cache-Control" "no-transform";

View file

@ -0,0 +1,11 @@
# Nginx's spdy module is compiled by default from 1.6
# SPDY only works on HTTPS connections
# Inform browser of SPDY availability
add_header Alternate-Protocol 443:npn-spdy/3;
# Adjust connection keepalive for SPDY clients:
spdy_keepalive_timeout 300s; # up from 180 secs default
# enable SPDY header compression
spdy_headers_comp 6;

View file

@ -0,0 +1,9 @@
# OCSP stapling...
ssl_stapling on;
ssl_stapling_verify on;
#trusted cert must be made up of your intermediate certificate followed by root certificate
#ssl_trusted_certificate /path/to/ca.crt;
resolver 8.8.8.8 8.8.4.4 216.146.35.35 216.146.36.36 valid=60s;
resolver_timeout 2s;

View file

@ -0,0 +1,44 @@
# Protect against the BEAST and POODLE attacks by not using SSLv3 at all. If you need to support older browsers (IE6) you may need to add
# SSLv3 to the list of protocols below.
ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
# Ciphers set to best allow protection from Beast, while providing forwarding secrecy, as defined by Mozilla (Intermediate Set) - https://wiki.mozilla.org/Security/Server_Side_TLS#Nginx
ssl_ciphers ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:ECDHE-RSA-DES-CBC3-SHA:ECDHE-ECDSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:AES:CAMELLIA:DES-CBC3-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!PSK:!aECDH:!EDH-DSS-DES-CBC3-SHA:!EDH-RSA-DES-CBC3-SHA:!KRB5-DES-CBC3-SHA;
ssl_prefer_server_ciphers on;
# Optimize SSL by caching session parameters for 10 minutes. This cuts down on the number of expensive SSL handshakes.
# The handshake is the most CPU-intensive operation, and by default it is re-negotiated on every new/parallel connection.
# By enabling a cache (of type "shared between all Nginx workers"), we tell the client to re-use the already negotiated state.
# Further optimization can be achieved by raising keepalive_timeout, but that shouldn't be done unless you serve primarily HTTPS.
ssl_session_cache shared:SSL:10m; # a 1mb cache can hold about 4000 sessions, so we can hold 40000 sessions
ssl_session_timeout 24h;
# SSL buffer size was added in 1.5.9
#ssl_buffer_size 1400; # 1400 bytes to fit in one MTU
# Session tickets appeared in version 1.5.9
#
# nginx does not auto-rotate session ticket keys: only a HUP / restart will do so and
# when a restart is performed the previous key is lost, which resets all previous
# sessions. The fix for this is to setup a manual rotation mechanism:
# http://trac.nginx.org/nginx/changeset/1356a3b9692441e163b4e78be4e9f5a46c7479e9/nginx
#
# Note that you'll have to define and rotate the keys securely by yourself. In absence
# of such infrastructure, consider turning off session tickets:
#ssl_session_tickets off;
# Use a higher keepalive timeout to reduce the need for repeated handshakes
keepalive_timeout 300s; # up from 75 secs default
# HSTS (HTTP Strict Transport Security)
# This header tells browsers to cache the certificate for a year and to connect exclusively via HTTPS.
#add_header Strict-Transport-Security "max-age=31536000;";
# This version tells browsers to treat all subdomains the same as this site and to load exclusively over HTTPS
#add_header Strict-Transport-Security "max-age=31536000; includeSubdomains;";
# This default SSL certificate will be served whenever the client lacks support for SNI (Server Name Indication).
# Make it a symlink to the most important certificate you have, so that users of IE 8 and below on WinXP can see your main site without SSL errors.
#ssl_certificate /etc/nginx/default_ssl.crt;
#ssl_certificate_key /etc/nginx/default_ssl.key;
# Consider using OCSP Stapling as shown in ssl-stapling.conf

View file

@ -0,0 +1,2 @@
# Force the latest IE version
add_header "X-UA-Compatible" "IE=Edge";

View file

@ -0,0 +1,10 @@
# Built-in filename-based cache busting
# https://github.com/h5bp/html5-boilerplate/blob/5370479476dceae7cc3ea105946536d6bc0ee468/.htaccess#L403
# This will route all requests for /css/style.20120716.css to /css/style.css
# Read also this: github.com/h5bp/html5-boilerplate/wiki/cachebusting
# This is not included by default, because it'd be better if you use the build
# script to manage the file names.
location ~* (.+)\.(?:\d+)\.(js|css|png|jpg|jpeg|gif)$ {
try_files $uri $1.$2;
}

View file

@ -0,0 +1,13 @@
# Cross domain webfont access
location ~* \.(?:ttf|ttc|otf|eot|woff|woff2)$ {
include h5bp/directive-only/cross-domain-insecure.conf;
# Also, set cache rules for webfonts.
#
# See http://wiki.nginx.org/HttpCoreModule#location
# And https://github.com/h5bp/server-configs/issues/85
# And https://github.com/h5bp/server-configs/issues/86
expires 1M;
access_log off;
add_header Cache-Control "public";
}

View file

@ -0,0 +1,43 @@
# Expire rules for static content
# No default expire rule. This config mirrors that of apache as outlined in the
# html5-boilerplate .htaccess file. However, nginx applies rules by location,
# the apache rules are defined by type. A consequence of this difference is that
# if you use no file extension in the url and serve html, with apache you get an
# expire time of 0s, with nginx you'd get an expire header of one month in the
# future (if the default expire rule is 1 month). Therefore, do not use a
# default expire rule with nginx unless your site is completely static
# cache.appcache, your document html and data
location ~* \.(?:manifest|appcache|html?|xml|json)$ {
expires -1;
access_log /var/log/nginx/static.log;
}
# Feed
location ~* \.(?:rss|atom)$ {
expires 1h;
add_header Cache-Control "public";
}
# Media: images, icons, video, audio, HTC
location ~* \.(?:jpg|jpeg|gif|png|ico|cur|gz|svg|svgz|mp4|ogg|ogv|webm|htc)$ {
expires 1M;
access_log off;
add_header Cache-Control "public";
}
# CSS and Javascript
location ~* \.(?:css|js)$ {
expires 1y;
access_log off;
add_header Cache-Control "public";
}
# WebFonts
# If you are NOT using cross-domain-fonts.conf, uncomment the following directive
# location ~* \.(?:ttf|ttc|otf|eot|woff|woff2)$ {
# expires 1M;
# access_log off;
# add_header Cache-Control "public";
# }

View file

@ -0,0 +1,13 @@
# Prevent clients from accessing hidden files (starting with a dot)
# This is particularly important if you store .htpasswd files in the site hierarchy
# Access to `/.well-known/` is allowed.
# https://www.mnot.net/blog/2010/04/07/well-known
# https://tools.ietf.org/html/rfc5785
location ~* /\.(?!well-known\/) {
deny all;
}
# Prevent clients from accessing to backup/config/source files
location ~* (?:\.(?:bak|conf|dist|fla|in[ci]|log|psd|sh|sql|sw[op])|~)$ {
deny all;
}

View file

@ -12,12 +12,19 @@ http {
sendfile on; sendfile on;
tcp_nopush on; tcp_nopush on;
tcp_nodelay on; tcp_nodelay on;
gzip on;
gzip_disable "msie6";
keepalive_timeout 65; keepalive_timeout 65;
types_hash_max_size 2048; types_hash_max_size 2048;
server_names_hash_bucket_size 64; server_names_hash_bucket_size 64;
gzip on;
gzip_disable "msie6";
gzip_vary on;
gzip_proxied any;
gzip_comp_level 6;
gzip_buffers 16 8k;
gzip_http_version 1.1;
gzip_types text/plain text/css application/json application/javascript text/xml application/xml application/xml+rss text/javascript application/javascript image/svg+xml;
access_log /var/log/nginx/access.log; access_log /var/log/nginx/access.log;
error_log /var/log/nginx/error.log; error_log /var/log/nginx/error.log;

View file

@ -6,6 +6,8 @@ server {
index index.php index.html; index index.php index.html;
charset utf-8; charset utf-8;
include /etc/nginx/h5bp/basic.conf;
location / { try_files $uri $uri/ /index.php?$query_string; } location / { try_files $uri $uri/ /index.php?$query_string; }
location ~ \.php$ { location ~ \.php$ {
@ -51,6 +53,8 @@ server {
index index.php index.html; index index.php index.html;
charset utf-8; charset utf-8;
include /etc/nginx/h5bp/basic.conf;
location / { try_files $uri $uri/ /index.php?$query_string; } location / { try_files $uri $uri/ /index.php?$query_string; }
location ~ \.php$ { location ~ \.php$ {